Thermo pine cladding
Show productsCarpentier offers thermo pine cladding with knots (pine) and without knots (clear pine). You can find the profiles we offer in thermo pine with knots here. Make sure to read about the specific advantages as well as the various finishing options that we can supply. Thanks to the tips and advice offered by our wood specialists, as a professional you can also be sure installation will be quick and simple.
Ready-to-use cladding profiles in thermo pine
Thermo pine is a great sustainable alternative for tropical hardwoods and an excellent option for outdoor cladding. Carpentier offers a wide variety of ready-to-use profiles, including three standard profiles in a black finish. We can also create custom cladding profiles in HOTwood pine as required.
We can also apply a fire-retardant treatment to our HOTwood pine outdoor cladding in compliance with B-s2,d0 norms and/or apply a finish to meet your specific requirements, including charring, brushing and oiling. Currently, black and transparent finishes are particularly popular for use with exterior cladding in thermo pine, but architects are leaning more and more towards on-trend timeless colours for outdoors. We have developed these colours together with the Belgian trendwatcher Hilde Francq. Besides these, a single-layer treatment with pale grey oil is often used to create a pre-weathered look without the wait. After this treatment, thermo pine weathers naturally with even more beautiful results. Please let us know if you would like more information about options for your project.
The advantages of thermo pine cladding
|
 |
Quick and easy mounting of cladding with QuickClip® profiles
Before you begin fitting cladding, we recommend you read the installation instructions carefully. You will find them in our downloads section, under “Manuals Cladding, Panelling and Ceiling”. You will also find a step-by-step guide for installing cladding around corners for some unique QuickClip® profiles.
For ease of use and rapid results when installing HOTwood pine cladding, we recommend QuickClip® profiles. These ready-to-use profiles in wood feature the unique, invisible Grad® installation system, which reduces installation time by 50%. Moreover, since they guarantee that boards are perfectly aligned, you can count on a seamless result every time.
Watch our tutorial and find out for yourself.
Did you know?
At Carpentier, all the accessories you need for fitting cladding are in stock and can be ordered at the same time. These include: waterproof membranes, battens and extra aluminium joists for finishing windowsills and door edges, and clip grips, etc.
Advice from our wood specialists
When cladding is installed vertically, the effects of gravity could cause boards to slide. Glue is often used to ensure they remain in place. However, this means that our QuickClip® cladding loses its circular character. That’s why we recommend to use the Grad® clip grip. This handy tool locks the cladding boards firmly onto the aluminium rail, without stopping them from being easy to dismantle and keeping their circularity. One clip grip per groove is enough to prevent any sliding.
QuickClip® cladding boards can easily be dismantled without damage using a set of dismantling keys. Dismantling boards can be really useful if work needs to be carried out behind the cladding, or if you want to smarten up the entire façade, or perhaps paint it a more on-trend colour.
Did you know?
Woodworking professionals can reduce installation time by up to 50% by using our QuickClip® products instead of traditional installation methods.
Projects in the spotlight
Carpentier works closely with architects and dealers who create remarkable projects using our thermo clear pine, such as a dental clinic in Oostrozebeke and an apartment building in Koksijde.
READY FOR MORE INSPIRING IDEAS?
Browse our projects
Browse our HOTwood pine cladding profiles
Besides the profiles with knots shown below, we also have a lovely range of flaw-free profiles without knots for cladding in HOTwood pine. Have a look at our thermo clear pine cladding.
HOTwood pine Cubus QC
CBQC
Product specifications
QuickClip® profile: 42 x 42 x 2700 mm or more
Interval of 18 mm or 38 mm
Including the Grad® installation system, consisting of aluminium joists* (12 x 55 mm)
with pre-mounted clips for placement at 60 cm intervals
(1.9 m joist per m²)
For stable and circular installation, we strongly recommend you use Grad® clip grips. This extremely handy tool enables you to lock the cladding boards on the aluminium rail and prevents any slipping due to gravity. One clip grip per groove is enough for each board.
Also available without the installation system
Our most popular finishes: brushed and black
Also available in knot-free HOTwood Clear Pine and HOTwood ash
*Under some conditions, the black coating on the rails may fade over time. For this reason, we advise customers to have aluminium rails anodised when using profiles with gaps of more than 10 mm.
HOTwood pine Fine line QC
SV3QC
Product specifications
QuickClip® profile: 20 x 40 x 2700 mm or more
Square edged
Interval of 5 mm
Including the Grad® installation system, consisting of aluminium joists (12 x 55 mm)
with pre-mounted clips for placement at 60cm intervals
(1.9 m joist per m²)
Meets B-s2,d0 (horizontal) / C-s1-d,0 (vertical) reaction to fire standards, after a fire-retardant treatment
For stable and circular installation, we strongly recommend you use Grad® clip grips. This extremely handy tool enables you to lock the cladding boards on the aluminium rail and prevents any slipping due to gravity. One clip grip per groove is enough for each board.
Also available without the installation system
Our most popular finishes: brushed and black
Also available in HOTwood ash, HOTwood clear pine, Accoya and aluminium
HOTwood pine Ignite T&G Plank - charred look
PLAN
Product specifications
Profile: 20 x 140 (coverage width 132) x 2700mm or more
Fitted with tongue and groove
Extremely durable
The charred look is a perfect imitation of the characteristic dragon-scale pattern of charred wood: deep black, embossed and brushed
Easy maintenance: apply a fresh coat of water-based black paint (Tikkurila Ultra Matt) every five to seven years
Good to know: the charred finish will retain its beauty forever
Meets D-s2,d0 reaction to fire standards, without a fire-retardant treatment
An economical alternative for charred wood
For interior and exterior use
Please note: allow for at least 2mm expansion at the tongue and groove joint, since HOTwood may expand slightly in humid conditions.
HOTwood pine Jump line - brushed black finish
SV4
Product specifications
Combination of four profiles: 20 x 90 (coverage width 71) | 26 x 68 (coverage width 49) | 20 x 115 (coverage width 96|20 x 68 (coverage width 49) | 26 x 68 (coverage width 49) x 3000mm or more
Fitted with tongue and groove
Varying widths and thicknesses give a dynamic play of lines
Brushed black finish (standard 7-year finish warranty) - Sand finish also available
Perfect for blind nailing
Meets D-s2,d0 reaction to fire standards, without a fire-retardant treatment
Also comes in a flat version based on the three profiles with a thickness of 20mm
Please note: allow for at least 2mm expansion at the tongue and groove joint, since HOTwood may expand slightly in humid conditions.
HOTwood pine Pillar line
PIL
Product specifications
Profile: 42 x 140 x 3000mm or more (up to maximum 5400mm)
Fixed louvers to be installed at regular intervals
Lamellated and solid
4 smooth sides square edged
Other dimensions available upon request
Also available in HOTwood ash
Looking for something a little more rugged? Have a look at our ould oak beams and old oak wall panelling. These are also ideal for use as a Pillar line profile.
Downloads
HOTwood pine Plus line QC
SV+QC
Product specifications
QuickClip® profile: 20 x 40|65|90|140 x 2700 mm or more
Fixed widths in variable pattern
Square edges
Interval of 4 mm
Including the Grad® installation system, consisting of aluminium joists (12 x 55 mm)
with pre-mounted clips for placement at 60 cm intervals
(1.9 m joist per m²)
For stable and circular installation, we strongly recommend you use Grad® clip grips. This extremely handy tool enables you to lock the cladding boards on the aluminium rail and prevents any slipping due to gravity. One clip grip per groove is enough for each board.
Also available without the installation system
Our most popular finishes: brushed and black
HOTwood pine Rebated feather edge
RB2
Product specifications
Profile: 12/26 x 140 (coverage width 125) x 2700mm or more
Upon request, also available with black finish and/or wider coverage widths (minimum order of 3,000 m)
Please note: allow for spacing of at least 2mm, since HOTwood may expand slightly in humid conditions.
Downloads
HOTwood pine Relief QC
RELQC
Product specifications
QuickClip® profile: 20 x 40|65|90|140 x 2700mm or more
Fitted with groove on underside
Including the Grad® installation system, consisting of alu joists (12 x 55mm)
with pre-mounted clips for placement at 60cm intervals
(1.9m joist per m²)
For stable and circular installation, we strongly recommend you use Grad® clip grips. This extremely handy tool enables you to lock the cladding boards on the aluminium rail and prevents any slipping due to gravity. One clip grip per groove is enough for each board.
Our most popular finishes: brushed and black
Downloads
HOTwood pine T&G Plank
N1
Product specifications
Profile: 20 x 140 (coverage width 132) x 2700mm or more
Fitted with tongue & groove
Meets D-s2,d0 reaction to fire standards, without a fire-retardant treatment
Our most popular finishes: brushed and black
Please note: allow for at least 2mm expansion at the tongue and groove joint, since HOTwood may expand slightly in humid conditions.
Cheaper alternative available in 17 mm thickness
HOTwood pine T&G Plank
N2
Product specifications
Profile: 17 x 140 (coverage width 132) x 2700mm or more
Fitted with tongue & groove
Ideal for cladding the rear façades of wooden outbuildings
Also available in a black finish
Please note: allow for at least 2mm expansion at the tongue and groove joint, since HOTwood may expand slightly in humid conditions.
HOTwood pine T&G Plank Plus line - Brushed black
N1 SV+
Product specifications
Profile: 20 x 68 (coverage width 60) | 115 (coverage width 107) | 140 (coverage width 132) x 3000mm or more
Widths available separately or in combination
Closed profile
Fitted with tongue & groove
Brushed black finish (standard 7-year finish warranty)
Meets D-s2,d0 reaction to fire standards, without a fire-retardant treatment
Please note: allow for at least 2mm expansion at the tongue and groove joint, since HOTwood may expand slightly in humid conditions.
HOTwood pine Triple
TRIP
Product specifications
Profile: 20 x 140 (coverage width 134) x 1800mm or more
Closed profile
Meets D-s2,d0 reaction to fire standards, without a fire-retardant treatment
Our most popular finishes: brushed and black
Please note: allow for spacing of at least 2mm, since HOTwood may expand slightly in humid conditions.
